All free tools

Speaker test: left and right audio check

Check that left and right are the right way round, that both sides work, and how low and high your speakers or headphones can go. The tones are generated in your browser.

Runs entirely in your browser. Nothing is recorded or sent anywhere.

How to use it

  1. Set the volume slider low, then put on your headphones or sit centred between your speakers.
  2. Press Left: the tone should come only from the left. Then try Right.
  3. Use Alternate L/R to hear it switch sides every second.
  4. Run the Frequency sweep to hear the range from deep bass to high treble, and listen for buzzing or rattling.

About the tones

  • 440 Hz is the standard musical note A, a comfortable test tone.
  • 100 Hz checks bass; 4 kHz and 10 kHz check treble and tweeters.
  • Mic test: Check your microphone with a live level meter and a private playback recording that stays on your device.
  • Webcam test: Preview your camera and see its real resolution and frame rate. Nothing is recorded or uploaded.
  • Controller tester: Test PS5, PS4, Xbox and other gamepads: buttons, triggers, sticks with a drift readout, and vibration.
  • Keyboard tester: Press every key and watch it light up on a visual keyboard to find dead or sticky keys.

Questions people ask

Left and right are swapped. How do I fix it?

For headphones, check the L and R marks; for speakers, swap the cables. On Windows, a “mono audio” setting under Accessibility plays both channels everywhere, so turn it off to test stereo.

I hear sound in only one ear. What does that mean?

If one side is silent on both the left and right tests, the earbud, wire or plug is likely faulty. If it plays only on one side for every test, check the balance setting in your sound settings.

What frequencies should I hear in the sweep?

Young adults typically hear about 20 Hz to 17–20 kHz; the top end falls with age. Small laptop and phone speakers produce little below 100–200 Hz, so silence at the start is normal on them.

Is it safe for my ears and speakers?

Start at a low volume, especially with headphones, and turn it up slowly. High-frequency tones can sound quiet but still be loud. Stop if anything is uncomfortable.