All free tools

Controller tester for PS5, PS4 and Xbox

Connect your controller by USB or Bluetooth and press any button. You’ll see every button and trigger, both sticks with live values, a drift check and a vibration test.

Runs entirely in your browser. Controller input is not recorded, stored or sent anywhere.

Connect a controller, then press any button on itUSB or Bluetooth both work. Browsers only show a controller to a page after you press a button while the page is open.

How to use it

  1. Connect the controller. For Bluetooth, pair it in your phone or PC settings first (PS5: hold Create and PS until the light flashes; Xbox: hold the pair button).
  2. Press any button so the browser shows it to the page.
  3. Press every button and pull both triggers fully. Each one should light up and reach 1.00.
  4. Rotate both sticks in full circles: the dot should reach the ring all round. Then let go and press Check stick drift.
  5. Press Test vibration to check the rumble motors.

Fixing stick drift

  • Raise the dead zone in the game’s controller settings to just above the drift reading.
  • Update the controller firmware (PS5 settings, or the Xbox Accessories app).
  • Persistent drift usually needs a repair or warranty replacement.
  • Keyboard tester: Press every key and watch it light up on a visual keyboard to find dead or sticky keys.
  • Mouse double-click test: Catch a mouse that double-clicks by itself, and test every button and the scroll wheel.
  • Refresh rate test: Check your monitor or phone refresh rate (60, 90, 120, 144 Hz) as your browser actually runs it.
  • Speaker test: Left and right speaker test with tones and a frequency sweep, for headphones, earbuds and speakers.

Questions people ask

My controller is connected but nothing shows. Why?

Browsers hide controllers from a page until you press a button while the page is open. Press any button. If it still doesn’t appear, reconnect it by USB, or check it works in your system’s game controller settings.

How do I check for stick drift?

Let go of both sticks and press Check stick drift. For three seconds the test records how far each stick sits from centre. Under 5% is normal; 5–10% is noticeable; above about 10–15% usually causes in-game drift and means a worn stick module.

Does vibration work in the browser?

In Chrome and Edge, for most Xbox and PlayStation controllers, yes. Firefox and Safari don’t support rumble from web pages, so the button is disabled there.

Why are the trigger values between 0 and 1?

L2/R2 (or LT/RT) are analogue. 0 is released and 1 is fully pressed. If a trigger never reaches 1.00 or doesn’t return to 0.00, the trigger sensor is worn or dirty.

Is anything recorded?

No. The page only reads the controller’s live state in your browser. Nothing is stored or sent anywhere.