Screen PPI calculator
Enter the resolution and the diagonal size, or pick a common screen. You get the pixel density, dot pitch and the screen’s real width and height.
Runs in your browser. Nothing you enter is sent to or stored by EpiFive.
| Screen width | 23.53 in (59.8 cm) |
|---|---|
| Screen height | 13.24 in (33.6 cm) |
| Diagonal | 27 in (68.6 cm) |
How to use it
- Pick a preset, or type the width and height in pixels.
- Type the diagonal in inches, or switch to centimetres.
- Read the PPI, dot pitch and physical size.
Rough sharpness guide
- Desktop monitors: around 90–110 PPI is standard; 140 PPI and above looks crisp at 100–150% scaling.
- Laptops: 15.6-inch Full HD is about 141 PPI.
- Phones: 400 PPI and above, where single pixels are invisible at a normal distance.
Related tools
- TV size and viewing distance calculator: The right TV size for your room, or the best seating distance, using SMPTE and THX viewing angles.
- Aspect ratio calculator: Find the missing width or height for 16:9, 4:3, 9:16 and any ratio, and simplify a resolution to its ratio.
- Screen resolution checker: Your screen resolution in CSS pixels and physical pixels, device pixel ratio and browser viewport size.
- Dead pixel test: Full-screen colours to spot dead, stuck or hot pixels and backlight bleed on any screen.
Questions people ask
How is PPI calculated?
Find the diagonal in pixels with Pythagoras, then divide by the diagonal in inches: PPI = √(width² + height²) ÷ diagonal. A 27-inch 2560 × 1440 monitor has √(2560² + 1440²) = 2,937.2 pixels across the diagonal, so 2,937.2 ÷ 27 = 108.8 PPI.
Is a 24-inch 1080p monitor sharp enough?
A 24-inch Full HD monitor is about 91.8 PPI, which looks fine at a normal desk distance but shows some text fringing up close. 27-inch QHD (108.8 PPI) or 27-inch 4K (163.2 PPI) look noticeably sharper.
What is dot pitch?
The distance between the centres of two neighbouring pixels: 25.4 mm ÷ PPI. A 24-inch 1080p screen has a dot pitch of about 0.277 mm.
Do phones and monitors need the same PPI?
No. You hold a phone about 30 cm away and sit about 60–70 cm from a monitor, so phones need roughly twice the PPI to look equally sharp. Most phones are 400–500 PPI; a TV seen from 2–3 metres looks sharp at under 100 PPI.