Windows Update

Windows Update error 0x80240034: what it means and how to fix it

Error 0x80240034 means an update failed to download or the download was interrupted. Check the connection, the Windows Update service and the troubleshooter.

By EpiFive Editorial TeamSources checked How we check our guides

What the error means

In Microsoft's Windows Update error reference, 0x80240034 is WU_E_DOWNLOAD_FAILED, described as "Update failed to download." It is a download-stage error. Windows Update found the update, started fetching it, and did not end up with a complete copy, so it never moved on to installing.

Microsoft's two consumer pages describe the same thing from the user's side. The Windows Update troubleshooting page says the update process is stuck because of an incomplete update or a connection issue. The upgrade errors page says the operation did not complete because the download was interrupted. In Settings this often shows as an update that sits at a low percentage or keeps returning to "Pending download" before failing with the code in Update history.

Because the problem happens before installation, your system files are usually fine. The documented fixes are about the network path and the service that does the downloading. For broader update problems, including rollbacks after a restart, see Windows 11 update stuck or failing.

Common causes

  • An unstable or dropped internet connection while the update was downloading.
  • The Windows Update service not running, so the download could not continue or resume.
  • A firewall, security product or network setting blocking part of the download.
  • A previous update left incomplete, which Microsoft names as one cause of the stuck state.

How to fix it

1. Get a stable connection and restart the update

Microsoft's first step is a stable internet connection. On Windows 11 open Start, Settings, Network & Internet and confirm you are connected; reconnect to Wi-Fi or Ethernet if not. A wired connection or a stronger Wi-Fi signal helps with large updates. Then go to Settings, Windows Update and select Check for updates to restart the download. Microsoft lists restarting the update process as a fix in its own right.

2. Make sure the Windows Update service is running

  1. Press Win + R, type services.msc and press Enter.
  2. Find Windows Update in the list and check its status.
  3. If it is not running, right-click it and select Start.

Return to Settings and check for updates again.

3. Run the Windows Update troubleshooter

On Windows 11 select Start, Settings, System, Troubleshoot, Other troubleshooters, then Run next to Windows Update. On Windows 10 the path is Settings, Update & Security, Troubleshoot, Additional troubleshooters, Windows Update, Run the troubleshooter. Follow the on-screen instructions, then retry.

4. Check for firewall or network settings that block the download

Microsoft's upgrade errors page tells you to check for network issues or firewall settings blocking the update. On a home PC, look at any third-party firewall or security suite. On a work network, ask whoever manages the firewall or proxy whether Windows Update traffic is filtered, because a device that cannot reach the update source will keep failing with download errors.

5. General step: reset the update cache

If the same update keeps failing at the download stage, a general step from Microsoft's advanced troubleshooting section is to rename the update folders so Windows starts with a clean cache. This is not listed specifically for 0x80240034. Run these one at a time in an elevated Command Prompt, then restart:

net stop bits
net stop wuauserv
ren %systemroot%\softwaredistribution softwaredistribution.bak
ren %systemroot%\system32\catroot2 catroot2.bak
net start bits
net start wuauserv

If nothing works

As a general check that goes beyond Microsoft's pages for this code, if one update will not download on a connection that works for everything else, look at what sits between the PC and the internet, such as a VPN or a proxy. Microsoft's troubleshooting page also suggests a clean restart into Windows to rule out other software, and lists a clean installation of Windows only as the last option. On managed devices, the update policy configured by your IT team decides where the PC downloads from, so raise it with them.

What we checked

On 2026-11-19 we read three Microsoft pages that list 0x80240034. The Windows Update error reference on Microsoft Learn names it WU_E_DOWNLOAD_FAILED, "Update failed to download." The Windows Update troubleshooting page on support.microsoft.com describes a stuck update from an incomplete update or connection issue and gives the service check and troubleshooter steps. The upgrade errors page says the download was interrupted and lists a stable connection, restarting the update and checking network or firewall settings. We did not reproduce the error.

Last checked: 2026-11-19.

Official sources

Questions people ask

What does WU_E_DOWNLOAD_FAILED mean?

It is the Windows Update Agent name for 0x80240034, and Microsoft describes it as "Update failed to download." The install never started because the files did not arrive completely.

Can a firewall cause 0x80240034?

Yes. Microsoft's upgrade errors page lists checking for network issues or firewall settings blocking the update as one of the fixes for this code.

Should I clear the SoftwareDistribution folder for 0x80240034?

Try the documented steps first: a stable connection, the Windows Update service and the troubleshooter. Resetting the update cache is a general step from Microsoft's advanced troubleshooting section, not a fix it lists for this code.

  • 0x80070002 (Windows Update)

    Windows Update error 0x80070002 means a file the update needs could not be found. Restart, run the troubleshooter, free space, then repair the update files.

  • 0x8007000d (Windows Update)

    Error 0x8007000d means Windows Update downloaded invalid or corrupted data. Run the troubleshooter, clear the update cache, download again, then repair with DISM.

  • 0x800f0922 (Windows Update)

    Error 0x800f0922 means an update could not install, most often because of low disk space, a VPN blocking the update servers or a full System Reserved partition.

  • 0x80073712 (Windows Update)

    Error 0x80073712 means the Windows component store is damaged, so a file Windows Update needs is missing. Repair it with DISM and SFC, then update again.

Not your code?

Search the error code library, or report a code we don't cover. Spotted something out of date on this page? Report a correction.