Security & identity

SonicWall Gen 6 Firewalls Get No More Patches: What to Do Now

SonicWall says Gen 6 firewalls will get no firmware or security patches, even for Critical flaws. Find your model's end-of-support date and what to do now.

By EpiFive Editorial TeamReviewed/updated 8 min readHow we check our guides
On this page

SonicWall published a product advisory on 18 November 2026 telling customers still running Generation 6 (Gen 6) firewalls to replace them immediately and stop using them at the internet edge. The advisory says Gen 6 is past End of Support, so SonicWall will not release firmware or security patches for it, even for Critical flaws. The most important action: inventory every Gen 6 firewall, replace the ones exposed to the internet or used for remote access first, and apply SonicWall's interim measures until they are gone.

This is a lifecycle warning, not a report of a new vulnerability. Neither SonicWall's advisory nor The Hacker News report of 20 November 2026 names a new CVE, an attacker or indicators of compromise for this notice, and this article does not list any.

What happened

DateEventSource
23 Jan 2025 to 1 Oct 2026Gen 6 and Gen 6.5 models reach End of Support, model by model (see the table below)SonicWall advisory, citing its Product Life Cycle tables
18 Nov 2026SonicWall publishes "Product Advisory: Retire Unsupported Gen 6 Firewalls"SonicWall
20 Nov 2026The Hacker News reports the advisoryThe Hacker News

SonicWall's summary says it tells customers still running Gen 6 firewalls to replace them immediately and stop using them at the internet edge, and that it expects internet-facing Gen 6 devices to be targeted. The advisory states: "An end-of-life firewall that is still running is not a firewall that can still be secured."

SonicWall gives these reasons, with the sources it cites:

  • Edge devices and VPNs were targeted in 22% of breaches that began with an exploited vulnerability, up from 3% a year earlier (Verizon 2025 DBIR, via Censys, as cited by SonicWall).
  • The median time from disclosure to confirmed exploitation fell from 120 days in 2025 to 80 days in the first half of 2026, and 141 flaws were exploited from January to August 2026 (CSO Online, October 2026, as cited by SonicWall).
  • When a flaw affects several firewall generations, a public advisory can point attackers at unpatched Gen 6 devices. SonicWall cites CVE-2024-40766 (CVSS 9.3) from 2024 as an example where Gen 6 was left unfixed.
  • SonicWall states that SonicOS 8 underwent AI-assisted security testing and SonicOS 6.x did not.

These are SonicWall's statements and the figures it quotes from others; EpiFive did not independently verify the third-party statistics.

Am I affected?

You are affected if you run any firewall in the Gen 6 or Gen 6.5 family with SonicOS 6.x, including Gen 6 NSv virtual firewalls. The advisory lists these End-of-Support dates:

End of SupportModels
8 Mar 2024NSA 2600
23 Jan 2025TZ300, TZ300W
20 Feb 2026SuperMassive 9200, 9400, 9600, 9800; NSsp 12800, NSsp 12400
16 Apr 2026SOHO, SOHO W, TZ300P, NSa 9250, NSa 9450, NSa 9650; NSv 10 to NSv 1600 (Gen 6 virtual)
1 May 2026NSa 2650
1 Aug 2026TZ400, TZ400W, TZ600, TZ600P, NSA 3600, NSa 3650
1 Oct 2026TZ350, TZ350W, TZ500, TZ500W, SOHO 250, SOHO 250W, NSA 4600, NSA 5600, NSA 6600, NSa 4650, NSa 5650, NSa 6650

Every date above is before 21 November 2026, so by SonicWall's tables every listed model is now out of support. We cross-checked one row: SonicWall's Product Life Cycle tables list TZ350/350W and TZ500/500W with an End of Support of 2026-10-01, matching the advisory. We could not cross-check the other models because the life-cycle page we opened did not list them in a form we could read.

How to tell on your own device: check the SonicOS version your firewall runs. SonicWall's advisory scopes the notice to devices running SonicOS 6.x. Check the model name against the table above and against SonicWall's Product Life Cycle tables.

Indicators of compromise: none were published with this advisory.

What to do now

SonicWall's required actions, in its order:

  1. Inventory all Gen 6 firewalls, including spares and branch units. SonicWall says your partner can help.
  2. Prioritize units exposed to the internet or providing remote access (SSL VPN, WAN management).
  3. Replace them with a Gen 8 firewall running SonicOS 8.
  4. Work with an authorized SonicWall partner to plan the migration.

Until each device is replaced, SonicWall lists these interim measures and states that they reduce exposure but do not secure an unsupported device:

  • Disable WAN management (HTTPS, SSH and SNMP on WAN interfaces).
  • Disable SSL VPN or limit it to known source addresses.
  • Enforce MFA on all remote-access and admin accounts, and reset local passwords.
  • Disable unused services and interfaces.
  • Monitor logs for unusual logins, configuration changes and traffic.

The advisory does not give menu paths for these settings. Use SonicWall's SonicOS documentation for your firmware version for exact locations rather than guessing; we did not open those pages in this run, so this article gives no click paths.

Plan the migration to Gen 8

SonicWall's knowledge base article on Gen 6 to Gen 8 migration says:

  • Before migrating, update the source firewall to SonicOS 6.5.4 build 14 or later.
  • Two methods exist: the in-product import in SonicOS 8, and the Migration App in Network Security Manager (NSM).
  • If the settings include VLAN or tunnel interfaces, use the NSM Migration App.
  • Some models can migrate only through the NSM Migration App, for example moving to TZ80, or from SuperMassive 9800, NSsp 12800 and NSsp 12400.

Selected mappings from that article:

Gen 6 modelGen 8 targets named by SonicWall
TZ300, TZ350, TZ400, TZ500TZ280 to TZ680, or NSa 2800 to NSa 6800
TZ600TZ380 to TZ680, or NSa 2800 to NSa 6800
NSa 3650, NSa 4600, NSa 4650NSa 3800 to NSa 6800
NSa 5600, NSa 5650NSa 4800 to NSa 6800
NSa 6600, NSa 6650NSa 5800 or NSa 6800
SuperMassive 9200, 9400, 9600; NSa 9250, 9450, 9650NSa 6800

The article gives no exact menu paths; it points to a separate Gen 8 migration article and the SonicOS 8 Migration Requirements Reference Guide. Ask your partner about current upgrade programs for Gen 6 customers, as the article suggests. Prices and licensing terms were not on the pages we read, so none are given here.

How to protect yourself

  • Treat end-of-support dates as patch deadlines. SonicWall's Product Life Cycle tables describe phases from Last Order Day to End of Support, and say End of Support ends technical support, firmware updates and hardware replacement. Track the date for every network device you own.
  • Keep management off the internet. SonicWall's own interim list starts with disabling WAN management.
  • Require MFA for remote access and admin accounts. This is on SonicWall's list and applies to any VPN.
  • Keep an up-to-date inventory. SonicWall's first step, including spares and branch units, is the one most teams skip.
  • Log monitoring. SonicWall recommends watching for unusual logins, configuration changes and traffic.

See also

What we checked

  • Opened SonicWall's "Product Advisory: Retire Unsupported Gen 6 Firewalls" on 2026-11-21; it is dated 18 November 2026 and is the primary source for every SonicWall statement above.
  • Opened The Hacker News report of 20 November 2026 and confirmed it matches the advisory on the replace-immediately message, the Gen 8 and SonicOS 8 recommendation and the interim measures.
  • Opened SonicWall's Gen 6 to Gen 8 migration knowledge base article on 2026-11-21 and took the version requirement (SonicOS 6.5.4 build 14 or later), the two migration methods and the model mappings from it.
  • Opened SonicWall's Product Life Cycle tables on 2026-11-21; TZ350/350W and TZ500/500W list End of Support 2026-10-01, the same as the advisory. The page did not list Gen 6 end-of-support dates for the other models in a form we could read.
  • The Hacker News article names no CVE, threat actor or indicators of compromise for this notice, and neither does the advisory beyond the 2024 example it cites.
  • Not tested on any firewall; nothing here was run on a device, and no menu paths are given because we did not open SonicOS documentation.

Last tested: 2026-11-21

Sources

Questions people ask

Will SonicWall patch Gen 6 firewalls for critical vulnerabilities?

No. SonicWall's product advisory of 18 November 2026 says Gen 6 is past End of Support, that it will not release firmware or security patches for it, and that no exception will be made for critical vulnerabilities.

Which SonicWall models does the Gen 6 advisory cover?

The advisory covers all Gen 6 and Gen 6.5 firewalls running SonicOS 6.x, including Gen 6 NSv virtual firewalls. The advisory lists TZ, SOHO, NSA, NSa, SuperMassive and NSsp models with their end-of-support dates.

Can I keep using a Gen 6 firewall if I lock it down?

SonicWall lists interim measures such as disabling WAN management and restricting SSL VPN, but says they reduce exposure and do not secure an unsupported device. SonicWall tells customers to plan replacement now.

Do I have to rebuild my configuration to move to Gen 8?

SonicWall says supported settings can move from SonicOS 6.5 to a Gen 8 firewall with the in-product import or the NSM Migration App, so a full rebuild is not required. Settings with VLAN or tunnel interfaces need the NSM Migration App, and the source firewall must first run SonicOS 6.5.4 build 14 or later.

SonicWallGen 6 firewallSonicOS 6End of supportEdge security