# Office Network Printer Offline: Setup and Troubleshooting Checklist > Fix a network printer that shows Offline in Windows 11: power-cycle, default printer, queue, Print Spooler, and re-adding the printer by a stable IP address. Source: https://www.epifive.com/blog/office-printer-network-setup-ip-driver-troubleshooting · Published 2026-10-28 · EpiFive ## Key takeaways - Microsoft's offline-printer steps are power-cycle, check the network, set the default printer, clear the queue, restart Print Spooler, re-add the printer and restart the PC. - Network printers go offline after power cuts or router restarts when their IP address changes, so give each printer a fixed address or DHCP reservation. - Windows 11's Get Help app has an automated printer troubleshooter that fixes many problems before you start manual steps. - Get-Printer and Get-PrinterPort in PowerShell show what Windows has installed and which ports exist, and need no administrator rights. - Record each printer's name, IP address, driver and location so that the next outage takes minutes rather than hours. A printer that shows Offline in Windows 11 usually means the PC cannot reach it or the Windows print service is stuck. Work through Microsoft's documented steps in order: power-cycle the printer, check the network, set it as the default printer, clear the print queue, restart the Print Spooler service, remove and re-add the printer, then restart the PC. For a network printer in an office, also make sure its IP address is fixed so the PC's port keeps pointing at the right device. ## Who this is for and what you will have This is for office managers and IT helpers who look after shared network printers on Windows 11 PCs. By the end you will have a repeatable troubleshooting sequence, a way to check what Windows thinks is installed, and a setup that stops the problem coming back after a router restart or power cut. The sequence follows Microsoft Support's article on troubleshooting offline printer problems, with office additions where noted. The Windows 10 menu paths differ slightly and are mentioned only where needed. ## Why printers go offline Windows marks a printer Offline when it cannot get a response from it or when the printer is set to work offline. In an office, the typical reasons are: - The printer is powered off, asleep or has lost its network connection. - The printer is on a different network from the PC, for example a guest Wi-Fi. - A print job is stuck and the Print Spooler service is not processing the queue. - The printer's IP address changed, so the PC is sending jobs to an address that no longer belongs to it. - Windows has the wrong driver or a duplicate copy of the printer installed. The IP address cause is the one that returns again and again, which is why the setup section later in this article matters. ## Before you start Gather this information so you do not guess: - The printer's current IP address, printed from its own menu or on a network configuration page, as described in its manual. - The printer's model number and a driver from the manufacturer's website. - The name of the printer as it appears under Printers & scanners. - Whether the PC and printer should be on the same network or VLAN. ## Step 1: Run the automated troubleshooter (Windows 11) Microsoft suggests starting with the printer troubleshooter in the Get Help app on Windows 11. It runs diagnostics and attempts to fix many printer problems. The shortcut address is aka.ms/OfflinePrinter. If it does not fix the problem, continue with the manual steps. ## Step 2: Power-cycle the printer Turn the printer off and unplug it. Wait 30 seconds, plug it back in and turn it on. Wait until the display shows it is ready, because many printers need a minute to rejoin the network. ## Step 3: Check the network Confirm the printer is on the same network as your PC. Microsoft's article words this for Wi-Fi printers: check the printer's built-in menu or manual to see which network it has joined. In an office, also confirm that the PC is not on a separate guest network, and that the printer's network cable, if it has one, is firmly connected with its link light on. You can test reachability from the PC. Replace the example address with your printer's: ```powershell Test-Connection 192.168.1.50 -Count 2 ``` If this fails while the printer says it is connected, the address on the printer is probably different from what the PC expects. ## Step 4: Set the default printer On Windows 11, open Settings, go to Bluetooth & devices, then Printers & scanners. Select your printer and choose Set as default. If that option is missing, turn off Let Windows manage my default printer first. On Windows 10, open Settings, go to Devices, then Printers & scanners, select the printer and choose Open queue. Under Printer, choose Set As Default Printer, and make sure Pause Printing and Use Printer Offline are not checked. ## Step 5: Clear the print queue On Windows 11, in Printers & scanners, select the printer and choose Open print queue. Select the ellipsis (three dots) and choose Cancel all. On Windows 10, select each stuck document, open the Document menu and choose Cancel. ## Step 6: Restart the Print Spooler 1. Click the taskbar search box and type services, then open Services. 2. Find Print Spooler, right-click it and choose Restart. From an elevated PowerShell window, the equivalent is: ```powershell Restart-Service -Name Spooler ``` If jobs were stuck, check the queue again after the restart. ## Step 7: Remove and re-add the printer On Windows 11, in Printers & scanners, select the printer, choose Remove and confirm Yes. Make sure the printer is on and connected, then next to Add a printer or scanner choose Add device and follow the prompts. On Windows 10 the buttons are Remove device and Add a printer or scanner. If Windows does not find the printer automatically, it offers a way to add it manually. The usual route is to choose the option that says the printer you want is not listed, then add it using an IP address or hostname with the device type set to TCP/IP Device. Keep the option to query the printer and select the driver automatically turned on. If Windows cannot find a driver, choose the manufacturer and model yourself or use Have Disk with the driver you downloaded. ## Step 8: Restart the PC Restart the computer to refresh the services that communicate with the printer. Microsoft lists this as the last of its seven steps. ## Check what Windows has installed PowerShell can show the printers and ports on a PC, and neither command needs administrator credentials according to Microsoft's reference: ```powershell Get-Printer Get-Printer -Name "Front Office Printer" | Format-List Get-PrinterPort ``` Use the first command to see which printers are installed and spot duplicates. Use the last to look at the ports, then compare the address of the port used by your printer with the address printed by the printer itself. A mismatch confirms the IP-change cause. The related cmdlets Remove-Printer and Add-PrinterPort exist if you prefer to script a fix, but the Settings route above is enough for most offices. ## Make it stay fixed: stable address and a clean setup Most repeat offline problems come from the address moving. Choose one of these approaches: | Approach | How it works | When to use it | | --- | --- | --- | | DHCP reservation | The router or DHCP server always gives the printer the same address, matched on its hardware address | Most offices, because settings stay centrally managed | | Static address on the printer | You type the address, mask and gateway into the printer | Small setups without a managed DHCP server, taking care to pick an address outside the DHCP range | The related article [/blog/dhcp-reservation-static-ip-printers-office](https://www.epifive.com/blog/dhcp-reservation-static-ip-printers-office) compares both approaches in detail. If several PCs share one printer through a Windows server, see [/blog/shared-printer-setup-windows-print-server](https://www.epifive.com/blog/shared-printer-setup-windows-print-server). Good housekeeping also helps: - Install the manufacturer's driver on one PC, test, then repeat, rather than letting each PC pick a different driver. - Remove duplicate printer entries so that people do not print to a dead copy. - Record each printer's name, location, IP address, driver version and the person who maintains it. ## Verification - The printer status in Printers & scanners no longer says Offline. - A test page prints from at least two PCs. - Get-PrinterPort shows the port address matching the address on the printer's configuration page. - After you restart the router or the printer, it still prints without any change on the PCs. ## Troubleshooting - **Only one PC shows Offline.** The problem is local to that PC: clear its queue, restart its Print Spooler, and check that its port address is correct and that it is on the same network. - **Everyone is Offline.** Check the printer itself first: power, network cable or Wi-Fi, and its displayed address. - **Offline returns after every restart.** The address is changing. Set up a reservation or fixed address and update the port on each PC. - **Jobs will not clear.** Restart the Print Spooler, then cancel all jobs again. - **Set as default is missing.** Turn off Let Windows manage my default printer in Printers & scanners. - **Wrong or generic driver.** Remove the printer and re-add it with the manufacturer's driver. ## Checklist - Printer powered on, ready and joined to the right network. - Address fixed by reservation or static setting, and recorded. - PC port address matches the printer's address. - Queue empty and Print Spooler running. - One current printer entry per device, with the right driver. - Test page printed from two PCs. ## References - [Troubleshooting offline printer problems in Windows (Microsoft Support)](https://support.microsoft.com/en-us/windows/hardware/printer/troubleshooting-offline-printer-problems-in-windows) - [Get-Printer (Microsoft Learn)](https://learn.microsoft.com/en-us/powershell/module/printmanagement/get-printer) - [Get-PrinterPort (Microsoft Learn)](https://learn.microsoft.com/en-us/powershell/module/printmanagement/get-printerport) ## Frequently asked questions ### Why does my network printer keep showing Offline in Windows 11? Common causes are a printer that is off or on a different network, a stuck job in the queue, a stopped Print Spooler service, or a printer whose IP address has changed so the port no longer points at it. Work through Microsoft's steps in order and then check the port address. ### How do I restart the Print Spooler? Type services in the taskbar search box and open Services. Find Print Spooler, right-click it and choose Restart. Microsoft lists this as one of the standard steps for an offline printer. ### Should an office printer use a static IP address? It needs an address that does not change. Either give the printer a fixed address or, more commonly in offices, create a DHCP reservation so the router or server always hands it the same address. ### How do I clear a stuck print job? In Settings, open Bluetooth & devices, then Printers & scanners, select the printer and choose Open print queue. Select the ellipsis and choose Cancel all. If jobs still will not clear, restart the Print Spooler service.