To get the best picture from GTA 6 on PS5 or Xbox Series X|S, set the console's video output first (resolution, HDR, and 120 Hz if your TV supports it), switch the TV to its game mode, and only then open the game's own display options. On PS5 every console-side option is under Settings, Screen and Video, Video Output. Rockstar has not published GTA 6 graphics modes or frame-rate targets that we could verify, so this guide covers the setup you control and tells you what to look for in the game menu.
Who this is for and what you will have at the end
This guide is for anyone with a PS5 or Xbox Series X|S who is about to play GTA 6, which unlocks at midnight local time on November 19, 2026 in the US and India. You do not need a high-end TV; most of the steps help on any 4K set. By the end you will have the console sending the right resolution and HDR signal, the TV in a low-latency mode, optional 120 Hz and variable refresh rate (VRR) enabled if your TV supports them, and a short list of fixes for flicker, black screens and washed-out colors.
It does not promise a frame rate. No source we could open from Rockstar confirms performance modes, a 60 fps option or HDR behavior for GTA 6, so those are things to read off the game's menu, not assumptions. If you are still preparing for launch, the launch-day checklist and the storage guide cover the download side.
What to know before you change anything
Display settings have three layers, and a problem in any one of them looks the same on screen.
| Layer | What it controls | Where you change it |
|---|---|---|
| TV or monitor | Which signals the HDMI port accepts, game mode, HDR on the input | TV settings menu, per HDMI input |
| Console | Resolution, HDR output, 120 Hz, VRR sent to the TV | PS5: Settings, Screen and Video. Xbox: Settings, General, TV and display options |
| Game | Brightness, HDR calibration, any graphics mode choice | GTA 6's own settings menu |
Work from the outside in. If the TV does not accept a signal, nothing on the console fixes that, and if the console is limited to 1080p SDR, the in-game options cannot add HDR.
What you need for 4K at 120 Hz
Sony's PS5 resolution guide says the console supports the HDMI 2.1 specification and 4K 120 Hz output, but that support on TVs is still uneven. Its checklist says to confirm the TV claims 4K 120 Hz support and runs its latest firmware, use the included HDMI cable or an Ultra High-Speed cable rated for 4K 120 Hz, and connect directly to the TV's HDMI 2.1 port rather than through a receiver or other device. Search-result excerpts of Microsoft's Xbox support page describe the same requirement for Xbox Series X: an Ultra High Speed HDMI cable and a TV with HDMI 2.1. If you are unsure, 60 Hz at 4K is a normal and perfectly good setup.
Step 1: Pick the right HDMI port and cable
- Check the label next to each HDMI port on the TV. Many sets only have one or two ports that handle HDMI 2.1 features such as 4K 120 Hz and VRR; the label is often "4K 120" or "HDMI 2.1", but the exact text varies by maker, so check your TV's manual.
- Plug the console directly into that port. Sony says not to route through an intermediary device such as a receiver when troubleshooting 4K 120 Hz.
- Use the HDMI cable that came with the console, or a cable sold as Ultra High Speed. An old cable is a common cause of flicker and dropouts at 4K and 120 Hz.
- Update the TV firmware from its settings menu. Sony lists this as part of the same checklist.
Step 2: Turn on the TV's game mode and HDMI features
Every TV maker names these differently, so look in the TV's picture or input settings and in its manual rather than expecting exact wording.
- Game mode (sometimes called Game or Low Latency): reduces the processing the TV does to the picture, which cuts input delay. Turn it on for the HDMI input the console uses. Many TVs switch automatically, but not all.
- HDMI enhanced or deep color format (the name varies): some TVs only accept HDR and 4K 120 Hz on an input after you enable an extended HDMI mode for that port. If HDR is greyed out on the console, look for this setting in the TV menu.
- Motion smoothing (often called motion interpolation, soft motion or TruMotion style names): turn it off for games. It adds delay and changes the look of motion.
- VRR (may appear as VRR, Adaptive Sync, FreeSync or G-Sync Compatible): turn it on if the TV offers a switch.
Do these first. The console only offers 4K, HDR, 120 Hz or VRR if the TV reports that it can handle them.
Step 3: Set up the PS5
Sony's support pages give the exact path. All of the following are under Settings, Screen and Video, Video Output.
Resolution
Select Resolution. Sony's guide says Automatic chooses the highest resolution your TV supports and is the default, or you can choose 2160p for 4K. For 4K, the console has to be connected to a compatible 4K screen. Leave it on Automatic unless the picture is wrong.
HDR
Sony documents two ways in, both under Video Output:
- Go to Settings, then Screen and Video.
- Select Video Output, then HDR.
- Choose one of two options. Always On forces even non-HDR games and apps into HDR output. On When Supported shows non-HDR games and apps in SDR.
On When Supported is the better choice for most people because only content that is actually HDR is sent as HDR. To tune it, go to Settings, Screen and Video, Video Output, Adjust HDR, and follow the on-screen steps. If HDR will not turn on, Sony points to its Repairs diagnostic tool.
120 Hz Output
Under Video Output, the 120 Hz Output toggle lets the console send 120 Hz to TVs and games that support it. Sony's guide says to turn it off if you see video problems on a display. If you are on a 60 Hz TV, it does nothing useful; leave it as it is.
VRR
Video Output also has a VRR toggle that lets the refresh rate adjust in real time. Its sub-option, labeled Apply to Unsupported Games, is meant to help stabilize frame rate in games that do not support VRR. Try VRR on, and if you see flicker or odd brightness changes, turn it off and compare. Some TVs show brightness shifts with VRR in dark scenes, which is a TV behavior rather than a console fault.
Video Transfer Rate
If the screen flickers or goes black at 4K, Sony says to set Video Transfer Rate to Auto first, and if flicker continues, try -1 or -2 to limit the output. Do this before replacing hardware.
Step 4: Set up the Xbox Series X|S
We could not open Microsoft's Xbox display pages in full in this run, because the pages returned only their titles. The points below come from search-result excerpts of those pages and are labeled as such; confirm them on your console.
- Menu path. The excerpt says to go to Profile and system, then Settings, then General, then TV and display options.
- 4K at 120 Hz. The excerpt says to set Resolution to 4K UHD and Refresh rate to 120 Hz, and that it needs an Xbox Series X, an Ultra High Speed HDMI cable and a TV with HDMI 2.1. Some options only appear if the TV or monitor supports them.
- HDR10 and Dolby Vision. The excerpt says Xbox advises enabling both when your TV supports them, because most TVs that support Dolby Vision also support HDR10. If a TV supports Dolby Vision but not HDR10, the console only outputs HDR while apps use Dolby Vision.
- Greyed-out options. A February 2025 Xbox Insider release note, seen as an excerpt, mentions a fix for some video settings (4K 120 Hz, VRR, auto low-latency mode) being disabled unexpectedly, and suggests that the HDMI override under Video fidelity and overscan be switched to manual and back to auto-detect. That note was for a preview build, so treat it as something to try, not a guarantee.
Step 5: Check the game's own options
Once GTA 6 is installed, open its settings and look for a display or graphics section. We have no confirmed list of what GTA 6 offers: Rockstar has not published its console graphics modes or frame-rate targets in any page we opened, and press reports about a performance mode are unconfirmed. So look for these generic items and use what is actually there:
- Brightness or HDR calibration. If the game has a calibration screen, run it with HDR on. A washed-out image usually means the game and TV disagree about HDR, not that the console is broken.
- A mode choice. If the game offers a quality or performance style choice, try each for a few minutes in the same location and pick the one you prefer. Do not rely on a forum claim about which is better.
- A frame-rate or VRR note. If a mode says it needs a 120 Hz display or VRR, that is the game telling you what it uses.
Change one setting at a time, and drive or stand in the same spot when comparing so you are comparing the same scene.
Recommended starting setup
Use this as a starting point, then change it only if you see a problem.
| Setting | PS5 starting value | Why |
|---|---|---|
| Resolution | Automatic | Sony says it picks the highest your TV supports |
| HDR | On When Supported | Only HDR content is sent as HDR |
| 120 Hz Output | On if the TV supports 4K 120 Hz | Off if you see video problems |
| VRR | On if the TV supports it | Off if you see flicker |
| Video Transfer Rate | Auto | Use -1 or -2 only for flicker |
| TV game mode | On | Lowest input delay |
| Motion smoothing | Off | Adds delay in games |
Troubleshooting
The screen flickers or goes black
Work through Sony's order: confirm the TV firmware is current, use an Ultra High-Speed cable, plug into the HDMI 2.1 port directly with nothing in between, set Resolution to Automatic or 2160p, set Video Transfer Rate to Auto, and then try -1 or -2. Turn 120 Hz Output off to see if it clears.
Colors look washed out or too dark
Check that HDR is on for the HDMI input at the TV. On PS5, run Adjust HDR under Video Output. If only one game looks wrong, run that game's calibration. If everything looks flat, compare with HDR set to On When Supported against Always On; Always On forces HDR for content that is not HDR, which can look wrong.
HDR or 120 Hz options are greyed out
The console only shows options the TV reports as supported. Move the cable to another HDMI port, enable the TV's extended HDMI mode for that port, update the TV firmware, and check the cable. On Xbox, see the HDMI override note above.
The picture feels delayed
Turn on the TV's game mode and turn off motion smoothing. If the console is going through a soundbar or receiver, try connecting the console to the TV directly, as Sony's checklist does.
Brightness changes in dark scenes with VRR on
This can be a TV behavior with VRR. Turn VRR off on the console and compare. If the flicker disappears, leave it off for this TV.
Checklist
- Console on the TV's HDMI 2.1 port with a good cable.
- TV firmware updated and game mode on; motion smoothing off.
- PS5: Resolution Automatic, HDR On When Supported, then Adjust HDR.
- 120 Hz Output and VRR on only if the TV supports them and no flicker appears.
- Xbox: confirm the options on your own console under TV and display options.
- In GTA 6, run any calibration screen and compare modes one at a time.
For launch-night problems, see the download speed guide.
What we checked
- Opened Sony's PS5 HDR page on playstation.com on 2026-11-18: the path Settings, Screen and Video, Video Output, HDR; the two options Always On and On When Supported with Sony's descriptions; and the separate Adjust HDR path.
- Opened Sony's PS5 resolution guide on playstation.com on 2026-11-18: the Video Output labels Resolution (Automatic or 2160p), 120 Hz Output, VRR with Apply to Unsupported Games, and Video Transfer Rate (-1 or -2 for flicker), plus Sony's 4K 120 Hz troubleshooting checklist.
- Compared the two Sony pages: both place HDR, resolution, 120 Hz and VRR under Settings, Screen and Video, Video Output, so the paths in Step 3 are consistent.
- Microsoft's Xbox support pages (4K at 120 Hz, HDR TV settings, video settings) returned only their titles when opened, so the Xbox points come from search-result excerpts and are labeled that way. No Xbox label is quoted as verified.
- Searched for official GTA 6 display, HDR and performance-mode information on 2026-11-18. We found no Rockstar page confirming any, so the article makes no claim about GTA 6 frame rates or modes. Rockstar's GTAV settings support page timed out when opened.
- Not tested on a live console or TV; steps follow Sony's documentation as of 2026-11-18, TV menu names vary by maker, and menus can change with system updates.
Last tested: 2026-11-18
References
- Sony, How to enable HDR on a PS5 console: https://www.playstation.com/en-us/support/hardware/ps5-enable-adjust-hdr/
- Sony, How to change PS5 console resolution: https://www.playstation.com/en-us/support/hardware/ps5-4k-resolution-guide/
- Xbox Support, Set up 4K gaming at 120 Hz on Xbox Series X (excerpt only): https://support.xbox.com/en-US/help/hardware-network/display-sound/4k-gaming-at-120hz
- Xbox Support, Recommended TV settings for HDR (excerpt only): https://support.xbox.com/en-US/help/hardware-network/display-sound/hdr-tv-settings
Comments
Questions and tips are welcome. Comments are checked by the EpiFive team before they appear; please do not share passwords, phone numbers or other private details.